If you have not yet signed up to become a website tester, then you have very little time left to get in on this work from home opportunity that will always be free. When we reach 400,000 testers, we will no longer be accepting any more registrations. Right now we are at 382,000 and closing in fast on the 400,000 registered users mark. With an average of 10 persons signing up per minute, it will be only a short time before all the positions are filled. Starting in September, website testers will begin earning money from the job opps that they get. Registered users can also make money from persons who sign up using their referral link and from persons who sign up using the referrals links of persons they referred.

The website tester job opportunity is open to anyone anywhere in the world. Register today before it is too late. This job opportunity will ALWAYS be free! Remember, in a short while all the available positions will be filled, so go on over to website right now to get in on the money.

P.S. – If you are a webmaster and want to get your website tested, fill out your information on this page. Watch the video to see how your website will benefit from getting tested. Then enter your info in the form.

I am sure that you are bit perplexed about the topic of this post. Well, there is no need to worry or become overly concerned. After you learn how to achieve it, you will be pleasantly surprised and be more than willing to get your piece of the pie. This will be even more welcome to those persons who have websites that get little or no traffic at all. It would surely be nice to get TARGETED traffic that result in frequent sales of the products or services that you are promoting.

In fact, it is so easy to setup the automated system that you could be in profit in just minutes. Here’s something else that will make many persons jump for joy:

# You do NOT need to own a website or have any technical skills
# There are NO crippling advertising costs
# You do NOT need Google, Bing or ANYONE else telling you what to do

All you need to do is (1) choose a product to promote, (2) locate hidden “mass traffic funnels”, and (3) drive the traffic to YOU. Want in on this deal deal? Click here now.

This guide was originally put together by Dmitry Dovidenko, a former employee of HostGator. Though it may seem long, it is quite easy, and thanks to Dmitry installing FFmpeg and its dependencies for FLV conversion has been made easier. The guide will teach you how to install all the needed dependencies for ClipShare or other flash video conversion scripts that you may decide to use. It is primarily focused on Red Hat Enterprise Linux (RHEL) or CentOS installs for the dependencies of these packages. The links in this guide are fresh as of October 15, 2009, as I have edited the guide to include the newer versions of the tools and codecs that you need to install.

Here is what this guide will help you to install:

* FFmpeg (http://ffmpeg.org/)
* FFmpeg-PHP (http://ffmpeg-php.sourceforge.net)
* MPlayer + MEncoder (http://www.mplayerhq.hu/design7/dload.html)
* FLV2Tool (http://inlet-media.de/flvtool2)
* Libogg (http://www.xiph.org/downloads)
* Libvorbis (http://www.xiph.org/downloads)
* LAME MP3 Encoder (http://lame.sourceforge.net)

The assumption made here is that you already have Apache and PHP5 installed as those are required dependencies as well. The installation is to be done using any SSH (Secure Shell) application that you choose, from the root of your server.

First install subversion and ruby via yum or up2date:

yum -y install subversion ruby

Now we need to install MPlayer & FFmpeg sources from SVN:

cd ~
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg
svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer

Now we need some codecs:

wget http://www3.mplayerhq.hu/MPlayer/releases/codecs/essential-20071007.tar.bz2
tar xvjpf essential-20071007.tar.bz2
cd essential-20071007
mkdir /usr/local/lib/codecs
mv * /usr/local/lib/codecs/
chmod -R 755 /usr/local/lib/codecs/
cd ~

Next we will install LAME MP3 encoder:

wget http://sourceforge.net/projects/lame/files/lame/3.98.2/lame-398-2.tar.gz/download
tar xvzpf lame-398-2.tar.gz
cd lame-398-2
./configure –prefix=/usr
make
make install
cd ~

Now we install Libogg:

wget http://downloads.xiph.org/releases/ogg/libogg-1.1.4.tar.gz
tar xvzpf libogg-1.1.4.tar.gz
cd libogg-1.1.4
./configure –prefix=/usr
make
make install
cd ~

We need to make sure the correct lib directories are setup in ldconfig. Edit the /etc/ld.so.conf file and add the following lines:

/usr/lib
/usr/local/lib

Now save and run the following command:

ldconfig

To install libvorbis we will run:

wget http://downloads.xiph.org/releases/vorbis/libvorbis-1.2.3.tar.gz
tar xvzpf libvorbis-1.2.3.tar.gz
cd libvorbis-1.2.3
./configure –prefix=/usr
make
make install
cd ~

Now we will install FLVTool2:

wget http://rubyforge.org/frs/download.php/17497/flvtool2-1.0.6.tgz
tar xvzpf flvtool2-1.0.6.tgz
cd flvtool2-1.0.6
ruby setup.rb config
ruby setup.rb setup
ruby setup.rb install
cd ~

Next we should build MPlayer and MEncoder, a process that will take a while unless you have a powerful dual or quad core machine. Note that I have seen the SVN version of these packages break before, so you can always download the source code from their site (a stable copy) if it fails on make:

cd mplayer
./configure –prefix=/usr
make
make install
cd ~

We will now build FFmpeg:

mkdir /usr/local/src/tmp
chmod 777 /usr/local/src/tmp
export TMPDIR=/usr/local/src/tmp
cd ffmpeg
./configure –prefix=/usr –enable-libmp3lame –enable-libvorbis –disable-mmx –enable-shared
make
make install
cd ~

Symlink some libraries if needed (ignore file exists errors):

ln -s /usr/local/lib/libavformat.so.50 /usr/lib/libavformat.so.50
ln -s /usr/local/lib/libavcodec.so.51 /usr/lib/libavcodec.so.51
ln -s /usr/local/lib/libavutil.so.49 /usr/lib/libavutil.so.49
ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0
ln -s /usr/local/lib/libavformat.so.51 /usr/lib/libavformat.so.51

Now build FFmpeg-PHP:

wget http://downloads.sourceforge.net/project/ffmpeg-php/ffmpeg-php/0.6.0/ffmpeg-php-0.6.0.tbz2?use_mirror=voxel
tar xvjpf ffmpeg-php-0.6.0.tbz2
cd ffmpeg-php-0.6.0
phpize
./configure –prefix=/usr
make
make install
cd ~

Now you need to copy the ffmpeg.so file that was created from it’s location (from the build) to /usr/local/lib/php/extensions/. It should look something like:

cp /usr/local/lib/php/extensions/no-debug-non-zts-????????????/ffmpeg.so /usr/local/lib/php/extensions/

Modify your php.ini. Try /etc/php.ini or /usr/lib/php.ini or /usr/local/Zend/etc/php.ini as they are common locations. You can do php -i | grep -i ini to find the proper location. Change the extension_dir value as seen below and add the extension as seen below:

extension_dir = “/usr/local/lib/php/extensions/”
extension=ffmpeg.so

Now save and restart apache and test php for ffmpeg on both apache via phpinfo() and from shell:

service httpd stop
killall -9 httpd
service httpd start
php -i | grep -i ffmpeg

And that’s it! You are done. It took me about 30 minutes to do it properly. The time it will take you depends on your knowledge of SSH and the speed of your server.

You don’t have to take my word for it. Take a look at all the aged domains and expiring domains that are available now and pick the one or ones that you want. There are two options that will allow you to gain access: Free and Pro. Read the difference between the two and make your choice. Then you can go ahead and get all the expiring domains that you want. And guess what, you can sell them later for much more and make a huge profit! So, either way, it is a win-win situation for you.

» 15000 MB Data Storage
» 300 GB Data Transfer
» 3 Domains Hosted
» 100 E-mail accounts
» 20 FTP Accounts
» 20 MySQL Databases

You can also check out their Corporate and Enterprise plans which have lots of features and perks. Domains Curb will later on be offering more varied hosting packages based on the needs of its customers. If you are planning on setting up a website, why not host your site with Domains Curb and get a free domain name with your registration? All of their packages come with a one-click installation tool that gives you the opportunity to launch online your blog, cms, forum, gallery or e-commerce website in a matter of seconds. For as little as $4.33 a month for the basic hosting package, this deal can’t be beat.

Our package includes:
- 1500 MB of Disk Space, 100 GB Bandwidth
- Host your own domain (http://www.yourdomain.com)
- cPanel Powered Hosting (you will love it)
- Over 500 website templates ready to download
- Easy to use website builder
- Free POP3 Email Box with Webmail access
- FTP and Web based File Manager
- PHP, MySQL, Perl, CGI, Ruby.
- And many more..

Click here to visit us: FREE WEB HOSTING